Industrial Measurement & Control, CEM systems, measuring vans, shelter, analysers and gasconditiongcomponents

Laboratory equipment, color-, ph-, ion selective-, polari-, refracometers

Farmer measurements, NH3, emmision

Reduced Oxygen Reduced Breathing Device, Gas mixing systems

Refractometers, Color measurements and Calcium

Service, Preventive and corrective maintenance, 24/7 contracts

Marine emission monitoring

Home > Products > Gas conditioning > Ankersmid gascoolers > Peltier Cooler Type APC 1403

Brand: Ankersmid Sampling Type of measurement: extractive Gas Conditioning

Peltier Cooler Type APC 1403

This unique microprocessor controlled Peltier Cooler APC 1403 has been designed with a powerful dew point stabiliser. The dew point is set at 4°C but can be changed at any value between 1 and 15°C

Version APC 1403
This unique microprocessor controlled Peltier Cooler APC 1403 has been designed with a powerful dew point stabiliser. The dew point is set at 4°C but can be changed at any value between 1 and 15°C. The condensate that is formed should be removed by a peristaltic pump, automatic drain or collection vessel.

The heat exchanger is demountable and is made of PTFE/PFA®.

Additional information
The digital controlled cooler has many control and warning features like programmable alarms, mA-output, digital inputs and Modbus or RS485 communication.
The alarm status changes when the temperature deviates by • ± 3 °C from the set point.

Available for 230VAC and 115VAC power supply.

Application
Ankersmid Peltier Coolers are used to lower the dew point of humid gas to avoid condensate entering into the gas analyser.

A good and stable gas dew point avoids cross-interference if the analyser is sensitive to H2O.

Documentation

3.4 APC Peltier Cooler Series 1403

3.4 APC Peltier Cooler Series 1403