For high temperatures up to 200°C
Interchangeable PTFE-tube
(6x1 , 8x1 or 10x1 mm)
Application
This electrical heated AHLH2004-PA sample tube is designed to be connected to all Ankersmid sample elements. They are used to keep the necessary gas components above their ACID-dew point, and avoid condensation.
Description
Interchangeable sample tube out of PTFE in a second PTFE-tube.
These AHLH2004-PA heated lines are manufactured according to the clients needs and completely confectioned in the factory at a fixed length.
The sample line is standard equipped with a PT100 for temperature control. The heater used in this type is ONE serial resistance, twisted around the tube. Due to this construction we can not have cold zones or spots, where a potential blockage can occur.
Flexible isolation out of multi-layer glass wool.
A variety of standard lines is available but many options can be supplied as well.
Ready-to-use with multi-pole connector.
See our folder Chpt. 2.1.1 for all versions.
- Completely manufactured “ready-to-use”
- ONE serial heater
- Never cold spots
- Tube 6x1 , 8x1 or 10x1 mm
- Integrated PT100 (other sensors on request)
- External temperature controller required
- PTFE-tube interchangeable
ATEX-approval available (see AHLX)
Documentation
General terms of delivery 2024 ENG
Algemene leveringsvoorwaarden 2024
Contaminatie verklaring