For ultra-high temperatures up to 250°C
Stainless steel tube (6x1, 8x1 or 10x1 mm)
Application
This electrical heated AHLH2505-BR sample tube is designed to connect to all Ankersmid sample elements. They are used to keep the necessary gas components above their ACID-dew point, and avoid condensation.
This is a safe way to transport the sample to a heated analyser or the special Ankersmid coolers.
Description
Fixed sample tube out of stainless steel.
These AHLH2505-BR heated lines are manu-factured according to the clients needs and completely confectioned in the factory at a fixed length.
The sample line is standard equipped with a PT100 for temperature control. The heater used in this type is ONE serial resistance, twisted around the tube. Due to this construction we can not have cold zones or spots, where a potential blockage can occur.
Flexible isolation out of multi-layer glass wool
A variety of standard lines is available but many options can be supplied as well.
Ready-to-use with multi-pole connector.
See our folder Chpt. 2.1.1 for all versions.
- Completely manufactured “ready-to-use”
- ONE serial heater
- Never cold spots
- Tube 6x1 , 8x1 or 10x1 mm
- Integrated PT100 (other sensors on request)
- External temperature controller required
- Fixed stainless steel tube
Documentation
General terms of delivery 2024 ENG
Algemene leveringsvoorwaarden 2024
Contaminatie verklaring