Industrial Measurement & Control, CEM systems, measuring vans, shelter, analysers and gasconditiongcomponents
Laboratory equipment, color-, ph-, ion selective-, polari-, refracometers
Farmer measurements, NH3, emmision
Reduced Oxygen Reduced Breathing Device, Gas mixing systems
Refractometers, Color measurements and Calcium
Service, Preventive and corrective maintenance, 24/7 contracts
Marine emission monitoring
Home > Gas Analysers > gas analysers => industry: airforce

Gas Analysers(25) Filter: gas analysers => industry: airforce

Gas Analysers

 

ROBD

ROBD

simulates altitude exposure and can be utilized for both research and training purposes 

ROBD Simulator Accessory Package

ROBD Simulator Accessory Package

The ROBD Simulator Accessory Package will simplify the set-up of the ROBD into your flight training/simulating program 

EcoPhysics nCLD822M

EcoPhysics nCLD822M

The nCLD 822 M analyzer is the next generation in two-channel high precision nitrogen oxide measurement. 

FID VOC analyser iFID SHED

FID VOC analyser iFID SHED

Outdoor Flame-Ionisation-Detector iFiD Mobile for continuous monitoring
 

Oxygen Transmitters

Oxygen Transmitters

We offer a wide range of transmitters suitable for general purpose as well as for hazardous locations. 

atmosFIRt

atmosFIRt

atmosFIRt is the latest generation of FTIR gas analyser technology from Protea in a portable or mobile form. 

Promass

Promass

Protea’s ProMass analyser is a compact, robustly designed semi-portable Quadrupole Mass Spectrometer (QMS) instrument. 

atmosFIR

atmosFIR

atmosFIR is the successor to Protea's previous emissions monitoring FTIR systems, 

atmosFIR CEM

atmosFIR CEM

atmosFIR CEM is a complete emissions monitoring system incorporating the atmosFIR 19” FTIR analyser. 

atmosFIRi

atmosFIRi

atmosFIRi is a new concept in FTIR. The unit is designed as a general gas analyser that is simple to use 

atmosFIRw

atmosFIRw

The atmosFIR system improves upon previous FTIR technology and represents one of the most cost-effective and flexible analytical products on the market today. 

Atex Gas Analyser

Atex Gas Analyser

atmosFIR EX is an ATEX certified gas analyser system for measurement of industrial gases in a Zone 1 or Zone 2 area 

Solus Multipoint NH3

Solus Multipoint NH3

The Solus Multipoint NH3 Ammonia gas analyser is ideal for ambient air and livestock monitoring applications of Ammonia (NH3). 

ProtIR 204M

ProtIR 204M

Using the 204M for measurements of waste incineration and combustion plant process is as simple using an FTIR can be. 

FID analyser iFID Wall

FID analyser iFID Wall

Outdoor Flame-Ionisation-Detector iFiD Mobile for continuous monitoring 

Portable FID analyser iFiD

Portable FID analyser iFiD

The Flame-Ionisation-Detector (FID) measures the Total Hydrocarbon concentration in industrial and laboratory environment 

Total FID Analyser FID iFID Rack

Total FID Analyser FID iFID Rack

19" RackFlame-Ionisation-Detector iFiD Rack for continuous monitoring 

FID Analyser iFID Dual

FID Analyser iFID Dual

19" RackFlame-Ionisation-Detector iFiD Rack for continuous monitoring of 2 channels parallel 

LaserInspect CIMO4

LaserInspect CIMO4

All-in-one control panel for the LaserGas™ family
Sleek full-color touchscreen
15” with narrow tablet-style bezels 

T-Flange

T-Flange

Two analyzers on a single flange
Configurable setup with high flexibility
Low installation costs, low purge requirements 

Dew point meter HDT

Dew point meter HDT

Xentaur’s Dew Point Meter, Model HDT, is a rugged and unique loop powered dew point meter capable of both gas and liquid hydrocarbon phase measurements. 

SM-4 QAL1 mercuryanalyser

SM-4 QAL1 mercuryanalyser

QAL 1 certified for continuous, accurate and reliable measurement of total mercury emissions, even in very low concentrations and within complex matrices (SO2, NOx, HCl, etc.) 

FID Analyser iFID NMHC Mobile

FID Analyser iFID NMHC Mobile

19" RackFlame-Ionisation-Detector iFiD Rack for continuous monitoring 

Modular mercury stack gas monitor SM-4 mobile

Modular mercury stack gas monitor SM-4 mobile

Modular mercury stack gas monitor 

ZKM 1 & ZFK 8

ZKM 1 & ZFK 8

This oxygen analyzer is used to continuously measure oxygen concentration in combustion exhaust gas of industrial boilers or furnaces, 

Ankersmid Process
Samuel Morsestraat 4
7442 DH Nijverdal
Netherlands


(31)-0548-59 59 69
(31)-0548-62 19 72
info@ankersmid.com

© 2026 - Ankersmid Group