Gas Analysers

EcoPhysics nCLD822M

The nCLD 822 M analyzer is the next generation in two-channel high precision nitrogen oxide measurement.

Lees meer >

FID VOC analyser iFID SHED

Outdoor Flame-Ionisation-Detector iFiD Mobile for continuous monitoring

Lees meer >

Oxygen Transmitters

We offer a wide range of transmitters suitable for general purpose as well as for hazardous locations.

Lees meer >

atmosFIRt

atmosFIRt is the latest generation of FTIR gas analyser technology from Protea in a portable or mobile form.

Lees meer >

Promass

Protea’s ProMass analyser is a compact, robustly designed semi-portable Quadrupole Mass Spectrometer (QMS) instrument.

Lees meer >

atmosFIR

atmosFIR is the successor to Protea's previous emissions monitoring FTIR systems,

Lees meer >

atmosFIR CEM

atmosFIR CEM is a complete emissions monitoring system incorporating the atmosFIR 19” FTIR analyser.

Lees meer >

atmosFIRi

atmosFIRi is a new concept in FTIR. The unit is designed as a general gas analyser that is simple to use

Lees meer >

atmosFIRw

The atmosFIR system improves upon previous FTIR technology and represents one of the most cost-effective and flexible analytical products on the market today.

Lees meer >

Atex Gas Analyser

atmosFIR EX is an ATEX certified gas analyser system for measurement of industrial gases in a Zone 1 or Zone 2 area

Lees meer >

Solus Multipoint NH3

The Solus Multipoint NH3 Ammonia gas analyser is ideal for ambient air and livestock monitoring applications of Ammonia (NH3).

Lees meer >

ProtIR 204M

Using the 204M for measurements of waste incineration and combustion plant process is as simple using an FTIR can be.

Lees meer >

FID analyser iFID Wall

Outdoor Flame-Ionisation-Detector iFiD Mobile for continuous monitoring

Lees meer >

Portable FID analyser iFiD

The Flame-Ionisation-Detector (FID) measures the Total Hydrocarbon concentration in industrial and laboratory environment

Lees meer >

Total FID Analyser FID iFID Rack

19" RackFlame-Ionisation-Detector iFiD Rack for continuous monitoring

Lees meer >

FID Analyser iFID Dual

19" RackFlame-Ionisation-Detector iFiD Rack for continuous monitoring of 2 channels parallel

Lees meer >

LaserInspect CIMO4

All-in-one control panel for the LaserGas™ family
Sleek full-color touchscreen
15” with narrow tablet-style bezels

Lees meer >

T-Flange

Two analyzers on a single flange
Configurable setup with high flexibility
Low installation costs, low purge requirements

Lees meer >

Dew point meter HDT

Xentaur’s Dew Point Meter, Model HDT, is a rugged and unique loop powered dew point meter capable of both gas and liquid hydrocarbon phase measurements.

Lees meer >

SM-4 QAL1 mercuryanalyser

QAL 1 certified for continuous, accurate and reliable measurement of total mercury emissions, even in very low concentrations and within complex matrices (SO2, NOx, HCl, etc.)

Lees meer >

FID Analyser iFID NMHC Mobile

19" RackFlame-Ionisation-Detector iFiD Rack for continuous monitoring

Lees meer >

Modular mercury stack gas monitor SM-4 mobile

Modular mercury stack gas monitor

Lees meer >

..Ultramat/Oxymat 6

..Combinatie van de Ultramat 6 en Oxymat 6 meetsystemen in 1 19” behuizing tot een compacte plaatsbesparende oplossing voor meting van 2 NDIR componenten en zuurstof.

Lees meer >

ECO PHYSICS nCLD EL S

The nCLD EL S is the next generation in single-channel NO/NOX measurement. Unique in speed and precision

Lees meer >

FID Analyser Fidamat 6

Gas analyzers with an FID (flame ionization detector) are well suited for the continuous total hydrocarbon measurement.

Lees meer >

..Siemens Ultramat 23

Versatile , economical, multi- component NDIR + O2 analyzer for continuous measurement

Lees meer >

Siemens Ultramat 6

The summit analyzer area for a wide variety of applications in highly corrosive and complex applications.

Lees meer >

Combustion efficiency Analyzer

It can be used for measurement of the concentration of CO, CO2 and O2 in sample gases simultaneously.

Lees meer >

Online NDIR Flue Gas Analyzer

Gasboard 3000 flue gas analyzer can be used for measurement of the concentration of up to 5 gases such as SO2, NO,CO, CO2 and O2 components in sample gases simultaneously

Lees meer >

Biogas Syngas Analyser

A complete wall-mounted biogas analysis system consists of a rack type biogas analyzer Gasboard-3200, metal case, and gas conditioning system

Lees meer >

Ankersmid Paramagnetic Analyzer

The Ankersmid APA Series is a precise oxygen gauge for continuous monitoring purposes. The instrument is microprocessor controlled with self-diagnosis capability

Lees meer >

Xentaur Dew Point Extractive Sampling System

The ESS dew point measurement system has a modular design and can be configured to meet almost any dew point analysis requirement using different dew point meters manufactured by COSA Xentaur.

Lees meer >

SM-5 Mercury CEMS

Total mercury emissions monitor in stack flue gases

Lees meer >

LaserGas III Ultra

Process control & process safety in a single analyzer
Designed for long OPLs & high ranges
Baseline-insensitive

Lees meer >

FID analyser iFID NMHC

The stationary Flame-Ionisation-Detector (FID) iFiD NMHC measures with its built in NMHC Cutter the methane concentration and parallel in a second channel also the THC

Lees meer >

Flow Measurement Devices

The continuous velocity and temperature measurement is very important when operating a system with gas flows (for example indoor exhaust air, exhaust gases).

Lees meer >

LaserGas™ II SP Hydrogen

In-situ measurement
Suitable for hazardous environment
Continuous internal health check

Lees meer >

Portable Mercury Meter 3000 XS

Very small, ultra-light, with on-board GPS, data logger, battery pack and color TFT display for very comfortable and easy mercury monitoring in ambient air and other gases

Lees meer >

Mercury VM-3000

Perfectly adapted for continuous Air Quality monitoring, laboratories, environmental surveillance, quality control, etc.

Lees meer >

Automatic mercury stack gas monitor SM-3

The SM-3 mercury analyzer measures continuously the elemental, bound and ionic mercury in stack fluegas

Lees meer >

Mercury Monitoring System MMS

The MMS basically comprises a multiplexer-valve unit and a highly accurate and selective mercury detector (VM-3000 Vapor Monitor) for measurements in air and other gases

Lees meer >

Highly sensitive mercury analyser UT3000

Measuring of Total Gaseous Mercury (TGM) in air and other gases. Reliable for measurements at ultra-trace levels (sub-ng/m³) according to EN 15852 .

Lees meer >

The MC-3000 is used for generating a continuous stream of a mercury vapor loaded gas stream in order to check or calibrate mercury analyzers. It is also suitable for all those applications where a gas stream with a preset and constant mercury concentration is needed.

Lees meer >

Calomat 6

..

Lees meer >

ECO PHYSICS nCLD 822 SSdhr

The solution for simultaneously measured NO and NOx has got a name: CLD 822. The heated inlet copes with hot and humid gas samples no gas cooler required!

Lees meer >

Serani Software

Tiger Optics’ Serani™ Analyzer Interface Software offers users a new way to access their analyzer remotely from any computer or laptop.

Lees meer >

Spark platform

The Spark is the lowest cost CRDS analyzer on the market, offering powerful performance on a budget, plus the highest range (5 orders of magnitude!) and fastest speed of any Tiger analyzer! Available for detection of H2O and other molecules in a variety of matrices, the Spark is ideal for cylinder analysis in industrial and medical gases, and many other applications.

Lees meer >

CO-Rekt

The CO-rekt allows the use of Tiger's powerful CRDS technology in harsh industrial environments. Outfitted with a purged enclosure, the CO-rekt meets Class I, Div 2 specifications for use as CO, H2O, CH4 and CO2 analyzer in SMR and HyCO processes, among others.

Lees meer >

HALO Platform

The HALO is our most versatile analyzer, with a perfect blend of high performance, compact footprint, and cost efficiency. The HALO is used to analyze an enormous variety of gases, including hydrides, fluorides, rare gases, and more.

Lees meer >

LaserTrace System

The LaserTrace is our most powerful trace gas analyzer with detection limits as low as 50 ppt, capable of measuring four molecules at a time on up to four separate lines. The system is the semi industry standard to monitor H2O, CH4 and O2 in bulk gases, but is also available for many other molecules and applications.

Lees meer >

Prismatic 2

The Prismatic 2 is a multi-species analyzer capable of monitoring up to four trace molecules in a single gas stream. It is an ideal solution for applications that require the simultaneous analysis of multiple analytes in real-time, for instance, quality control of fuel-cell grade hydrogen or monitoring of unmanned ASUs.

Lees meer >

Gas Analysers(67) Filter: gas analysers => industry: chemical request information

Gas Analysers(67) Filter: gas analysers => industry: chemical