Branch: Airforce, Filtered results: 54
after 30 years of a good gasconditioning, we have a new a innovated range of sampling !
Sampling start with the sample take off point. If you have a colt spot, your measurements are worthless or your analysers can be damaged
The heated sample lines are manufactured according to the client’s specification and completely confectioned in the factory to a fixed le
The Ankersmid gas coolers series ACC ( Compressor system) and APC (Peltier system) are offering precision, safety and long-term stability for extractive analytical systems
Fast loop liquid Samplers which collect process samples without emissions to the atmosphere or exposure to the operator
Membrane pumps with rotative or linear motor, out of PTFE, Kynar PVDF or Stainless Steel. Peristaltic pumps
Automatic condensate traps or condensate collectors out of different materials,.
Rota meters out of glass or Plexiglas with or without needle valve. Flow alarm
Complete range of PVDF , PP , PTFE or Stainless Steel Connectors, fittings and manifolds
The ATC temperature controllers are modern microprocessor-based (PID) control devices, featuring easy handling and a digital display. The clear design of the operator control level facilitates fast and reliable adjustment.
Various gas / liquid filters
filters can be combined as well
We offer a wide range of transmitters suitable for general purpose as well as for hazardous locations.
atmosFIR is the successor to Protea's previous emissions monitoring FTIR systems,
atmosFIR CEM is a complete emissions monitoring system incorporating the atmosFIR 19” FTIR analyser.
atmosFIRt is the latest generation of FTIR gas analyser technology from Protea in a portable or mobile form.
atmosFIRi is a new concept in FTIR. The unit is designed as a general gas analyser that is simple to use
The atmosFIR system improves upon previous FTIR technology and represents one of the most cost-effective and flexible analytical products on the market today.
atmosFIR EX is an ATEX certified gas analyser system for measurement of industrial gases in a Zone 1 or Zone 2 area
The Solus Multipoint NH3 Ammonia gas analyser is ideal for ambient air and livestock monitoring applications of Ammonia (NH3).
Using the 204M for measurements of waste incineration and combustion plant process is as simple using an FTIR can be.
Protea’s ProMass analyser is a compact, robustly designed semi-portable Quadrupole Mass Spectrometer (QMS) instrument.
In industry, active environmental protection means effectively reducing or preventing pollutants and impacts on the environment
This oxygen analyzer is used to continuously measure oxygen concentration in combustion exhaust gas of industrial boilers or furnaces,
Thermo Scientific™ Orion™ product line is well known around the world for excellence in water and liquid analysis. Our meters, electrodes, buffers,
The Thermo Scientific Orion electrode line offers a wide variety of quality pH electrodes to choose from.
Measurement by ISE can be performed in virtually every laboratory. ISEs measure ion concentrations in samples such as water, food, pharmaceuticals and biological samples.
Electrical conductivity is an inherent property of most materials, and ranges from extremely conductive materials such as metals to non-conductive materials like plastic or glass.
Dissolved oxygen is often referred to as DO. It is a measure of the amount of oxygen in a solution.
Colorimeters and Turbidity meters both employ optical measurements. Optical measurements use light to quantify the amount of a colored or cloudy sample.
Get reliable, high performance conductivity measurements with the durable Thermo Scientific™ Orion™ 2002SS and 2002CC Conductivity Cells.
simulates altitude exposure and can be utilized for both research and training purposes
The ROBD Simulator Accessory Package will simplify the set-up of the ROBD into your flight training/simulating program
Xentaur’s Dew Point Meter, Model HDT, is a rugged and unique loop powered dew point meter capable of both gas and liquid hydrocarbon phase measurements.
Online TOC Analyzer - TOCADERO One
Water analysis of the next generation
Modular mercury stack gas monitor
QAL 1 certified for continuous, accurate and reliable measurement of total mercury emissions, even in very low concentrations and within complex matrices (SO2, NOx, HCl, etc.)
All-in-one control panel for the LaserGas™ family
Sleek full-color touchscreen
15” with narrow tablet-style bezels
Two analyzers on a single flange
Configurable setup with high flexibility
Low installation costs, low purge requirements
The Flame-Ionisation-Detector (FID) measures the Total Hydrocarbon concentration in industrial and laboratory environment
19" RackFlame-Ionisation-Detector iFiD Rack for continuous monitoring
Outdoor Flame-Ionisation-Detector iFiD Mobile for continuous monitoring
Outdoor Flame-Ionisation-Detector iFiD Mobile for continuous monitoring
19" RackFlame-Ionisation-Detector iFiD Rack for continuous monitoring of 2 channels parallel
19" RackFlame-Ionisation-Detector iFiD Rack for continuous monitoring
The nCLD 822 M analyzer is the next generation in two-channel high precision nitrogen oxide measurement.
The Liebherr P78 sensor in conjunction with the Liebherr FMS moisture measuring installation has become indispensable for many industrial processes
The Liebherr in situ water content determination Litronic-FMS III-RMH12 is used to detect the water content (concentration determination)
Small, fine, excellent: The Liebherr P30-S sensor in conjunction with the Liebherr FMS moisture measuring installation has become indispensable for many industrial processes.
The CAN bus is used in on- and off-road applications, vehicles in the construction and agricultural sectors as well as in engines. The CAN bus is integrated in the sensor.
The Liebherr Litronic WMS II water content meter is used to measure the moisture or water content of a wide range of water content
- Evaluation of the complex dielectric in the high frequency stray field
- Freely scalable measuring range
- Material curve switching
- Sensor replacement without recalibration
- Temperature compensation
Liebherr offers certified sensors for determining the moisture in bulk materials for the potentially explosive atmospheres Zone 21 and 22.
A self-sufficient moisture measuring installation with high connectivity and many interesting possibilities. With ProfiNet technology on board, extensive signal processing and WEB-based access, we are ready for Industry 4.0.
We design and produce a complete range of state of the art analyzers, sampling systems, data acquisition systems and software for the measurement & reporting of pollutant.