Industrial Measurement & Control, CEM systems, measuring vans, shelter, analysers and gasconditiongcomponents

Laboratory equipment, color-, ph-, ion selective-, polari-, refracometers

Farmer measurements, NH3, emmision

Reduced Oxygen Reduced Breathing Device, Gas mixing systems

Refractometers, Color measurements and Calcium

Service, Preventive and corrective maintenance, 24/7 contracts

Marine emission monitoring

Home > Applications

Applications

H2S in Water

Measuring hydrogen sulfide concentration in a pH-volatile liquid (such as water) is much more difficult than in a medium like natural gas.

Lees meer >

Ammonia Emissions Monitoring

Ammonia in the atmosphere results from a number of anthropogenic activities primarily associated with intensive agriculture.

Lees meer >

Measuring TBC

Polymerization inhibitors are chemicals which stabilize reactive monomers and prevent spontaneous polymerization. If too little inhibitor is added to a reactive monomer,

Lees meer >

Fuel Cell Hydrogen Purity Analysis

Impurities, such as hydrogen sulfide and other sulfur-containing species, have a permanent effect on the efficiency of fuel cells

Lees meer >

HF Stack monitoring in Aluminium plants

Emissions from the Aluminium smelting process contains harmful gases for the environment, one of these gases is Hydrogen Fluoride (HF).

Lees meer >

Titanium Dioxide Manufacturing

The concentration of Vanadium in TiCl4 in the 0-20ppm range can be measured by the OMA-300.

Lees meer >

Combustion Control Processes

Controlling the air: fuel ratio to get the maximum useful heat from a fuel is always desirable from both a fuel efficiency and an environmental viewpoint.

Lees meer >

Analyzers in Acetone and Phenol Production

Acetone and phenol are two of the most commonly produced organic chemicals in the world.

Lees meer >

Moisture Measurement in Industrial Gas Industry

The industrial gas industry supplies gaseous and cryogenic liquid products to a wide variety of markets,

Lees meer >

Measuring MeHQ (Polymerization Inhibitor)

Polymerization inhibitors are chemicals which stabilize reactive monomers and prevent spontaneous polymerization.

Lees meer >

Measuring Purity of MEG (monoethylene glycol)

MEG is an important raw material in production of polyester fibers. The quality of the fibers is dependent on the purity level of the MEG precursor.

Lees meer >

Measuring Diesel in Jet Fuel

Consider the case of an aircraft carrier, where the jet fuel supplied for aircraft an potentially mix with the diesel supplied or forklifts

Lees meer >

HF Fenceline monitoring

The LaserGasTM III HF OP detector can detect very low concentrations of HF gas. The detector’s short response time ensures fast detection of an HF gas leak.

Lees meer >

In-situ Ammonia measurement in DeNOx

With the latest Neo laser, you can measure directly in the NH3 process. With fast response time / high reliability, this is an ideal solution for NH3 dosing.

Lees meer >

In-situ Ammonia measurement in DeNOx

With the latest Neo laser, you can measure directly in the NH3 process. With fast response time / high reliability, this is an ideal solution for NH3 dosing.

Lees meer >

Applications request information

Applications