Dutch          
Industrial Measurement & Control, CEM systems, measuring vans, shelter, analysers and gasconditiongcomponents
Laboratory equipment, color-, ph-, ion selective-, polari-, refracometers
Farmer measurements, NH3, emmision
Reduced Oxygen Reduced Breathing Device, Gas mixing systems
Refractometers, Color measurements and Calcium
Service, Preventive and corrective maintenance, 24/7 contracts
Marine emission monitoring
Home > Products > Liquid analysis > Kemtrak > DCP007-UV Industrial Photometer

Filter.

Component







































Show More


Type of measurement









Show More

Principal































Show More

DCP007-UV Industrial Photometer

Benefits
  • Real time in-line measurement
  • Ultra-low power UV analyzer
  • High performance UV LED light source
  • Drift and noise-free measurement
  • Zero maintenance measurement cells & fiber optics
  • Down to 5 AU (1 cm OPL), deeper absorbance measurements with shorter pathlengths
  • Long life UV LED light source that is easy to change
  • Analogue output (0/4-20 mA)
  • Modbus (slave) over TCP/IP & Profibus (optional)
  • Local & web based graphical user interface (TCP/IP)
  • ATEX Exd IIB + H2 T6 IP66 Category II 2 G (optional)

How it works
The Kemtrak DCP007 color & concentration analyzer consists of three components:

Control Unit. The control unit contains all electronics including light source and detectors.
Measurement Cell. Robust in-line (flow through) industrial process connection.
Fibre Optics. Industrial grade fibre optic assembly connects the control unit to the flow-cell.
The configuration shown here is a 316L stainless steel DIN DN50 flange measurement cell with stainless steel fully interlocked fibre optic assembly. Both measurement cell and fibres can withstand 250°C (482°F)

Measuring principle
The Kemtrak DCP007-NIR photometer measures at two wavelengths. A primary “absorbing” wavelength is used to measure the concentration of the chemical being monitored while a “non absorbing” reference wavelength is used to compensate for turbidity, air bubbles and/or fouling.Kemtrak industrial UV-VIS-NIR process photometer dual wavelength detection

The Kemtrak DCP007-NIR photometer uses precision fiber optics to shine a precisely focused monochromatic light through the process medium and back to a photo-detector.

The attenuation of the transmitted light beam caused by NIR absorbing substances in the process medium is mathematically described by the Beer-Lambert law.

Applying the Beer-Lambert law (below), the concentration of the sample can be calculated.

A = ε l c

where:

A = absorbance (= – log transmittance)
ε = molar absorptivity coefficient
l = optical path length
c = concentration of absorbing species

The Kemtrak DCP007 photometer is ideally suited for industrial environments where simplicity, stability and low maintenance is vital.

Documentation

Kemtrak DCP007 UV Photometer.pdf Kemtrak DCP007 UV Photometer.pdf
Kemtrak DCP007 Photometer.pdf Kemtrak DCP007 Photometer.pdf

Ankersmid Process
Samuel Morsestraat 4
7442 DH Nijverdal
Netherlands


(31)-0548-59 59 69
(31)-0548-62 19 72
info@ankersmid.com

© 2024 - Ankersmid Group