Ankersmid Process will be present at the Wots.
WOTS • 4 T/M 7 OKTOBER JAARBEURS UTRECHT
Seminar Quality & Control
Wednesday5 October – Room Mission 2
12:00-12:30
Quality Assurance System (QAS)
With users of analysis equipment survives the image supplied as standard analyzers meet the specifications of the supplier. The only way to guarantee this is to show that the test results were in fact correct. The QAS tool makes use of traceable standards, making it possible to fix the instrument characteristics and to check against applicable standards.
Richard Holtkamp, Ankersmid
INSTRUMENTATIE EXPEDITIE – ANKERSMID
Quality Assurance System (QAS)
The image with users of
analysis equipment which delivered live analyzers and measurement standards
meet the specifications of the supplier. Often this is also true, suppliers
handle internal and external standards to give the specified quality analyzers
to deliver and often guarantee. Users work towards a consistent quality of
their product. This quality is controlled by, inter alia, analyzers. These
analyzers will themselves have to meet the expectations of the user during the
lifetime of the analyzers. Only polish and validate 2 points /
calibration compliant not.
The only way to guarantee this
is by actually demonstrate that the measurement results are correct. The unique
QAS which Ankersmid process has been "the" tool that makes this
possible. With the help of the QAS, which uses international traceable
standards, it is possible to instrument the characteristics such as linearity,
span and zero drift, converter efficiency, etc. to capture and, if desired, to
test against applicable standards and measurement requirements.
Here we
can make use of the expertise of our independent measurement service BIEM
(Belgian Dutch Institute for Emission and Environmental Measurements). BIEM is
moreover accredited ISO 17025. For a complete overview of the scope, see the
site of the Council for Accreditation Scope L365.
Performance features:
Besides
the preventive and corrective maintenance Ankersmid has the ability to
determine the performance characteristics of analytical equipment.
In ISO
10849 and 12039 en NEN-EN 14789, 14792 are described on what specifications an emissions
monitor must meet.
These
specifications relate to both analytical aspects as response speed.
Parameters
on which the analyzers are tested
- linearity
- Identify
significant interference
- Lower
detection limit
- Response
times
- Zero and
span drift
- Converter
Efficiency
Other
parameters in consultation with the user.