Application
The Ankersmid universal separator is used to condensate (liquid) to separate saturated gas sampling
 
Description
This Moisture separators made from the same basic components as our modular filter series ACS.
The separator is equipped with the 2^nd gasinlet which is closed with a blind plug.
 
The gas is fed through a vertical pipe down then it should rise and will increase during the condensate forms. The direction change is the "shock effect". This prevents contact between the gas and condensate.
 
The glass fiber reinforced PTFE implementation can be heated to 180 ° C.
 
The glass exterior of the separator gives you the opportunity to visually check the function.
The bottom can either be a tight cap or put here a hose pump or condensate collecting container
 

• The sealing ring has a PTFE layer prevents hardening of the ring. That layer should sit against the glass 
• Reliable separation of condensate 
• ^E 2 gas from possible
• Available in different materialsHead of PTFE or stainless steel
• Bottom of Duran ® glass or stainless steel 

Documentation

3.6 ACS Condensate Separator