, Filtered results: 100
Flame Ionisation Detector to measure total hydrocarbons.
The nCLD EL S is the next generation in single-channel NO/NOX measurement. Unique in speed and precision
The solution for simultaneously measured NO and NOx has got a name: CLD 822. The heated inlet copes with hot and humid gas samples no gas cooler required!
The Messenger is the electronics unit for up to 4 single-channel sensors. This may also be of different types. The measured values can mathematically linked and utilized.
The turbidity probe model 22E-LC uses the principle of light absorption to detect dissolved or suspended particles in liquids.
The ultrasonic probe model AS3, together with transmitter model AT3, has been specially designed to measure particle concentration in a variety of liquids.
The sensor model LAS uses the principle of light absorption to detect dissolved or
suspended particles in liquids.
The universal transmitter model Messenger can be used with all optical sensors of the
Monitek series.
The turbidity sensor Model MoniTurb-F uses the principle of 12° forward scattered light to detect suspended particles in liquids.
The turbidity sensor Model MoniTurb-S uses the principle of 90° side scattered light to detect particles in liquids.
Perfectly adapted for continuous Air Quality monitoring, laboratories, environmental surveillance, quality control, etc.
Measuring of Total Gaseous Mercury (TGM) in air and other gases. Reliable for measurements at ultra-trace levels (sub-ng/m³) according to EN 15852 .
Versatile , economical, multi- component NDIR + O2 analyzer for continuous measurement
The summit analyzer area for a wide variety of applications in highly corrosive and complex applications.
The SM-3 mercury analyzer measures continuously the elemental, bound and ionic mercury in stack fluegas
The MC-3000 is used for generating a continuous stream of a mercury vapor loaded gas stream in order to check or calibrate mercury analyzers. It is also suitable for all those applications where a gas stream with a preset and constant mercury concentration is needed.
The AULA-254 Gold is a fully automated system for analyzing traces of mercury in aqueous and digested samples
The LabAnalyzer is the perfect solution for quantitative determination of mercury in aqueous samples and sample digests in the laboratory.
Gas analyzers with an FID (flame ionization detector) are well suited for the continuous total hydrocarbon measurement.
..Combinatie van de Ultramat 6 en Oxymat 6 meetsystemen in 1 19” behuizing tot een compacte plaatsbesparende oplossing voor meting van 2 NDIR componenten en zuurstof.
The new generation Oxygen Analyser hart-protocol
after 30 years of a good gasconditioning, we have a new a innovated range of sampling !
Sampling start with the sample take off point. If you have a colt spot, your measurements are worthless or your analysers can be damaged
The heated sample lines are manufactured according to the client’s specification and completely confectioned in the factory to a fixed le
The Ankersmid gas coolers series ACC ( Compressor system) and APC (Peltier system) are offering precision, safety and long-term stability for extractive analytical systems
Fast loop liquid Samplers which collect process samples without emissions to the atmosphere or exposure to the operator
Membrane pumps with rotative or linear motor, out of PTFE, Kynar PVDF or Stainless Steel. Peristaltic pumps
Automatic condensate traps or condensate collectors out of different materials,.
Rota meters out of glass or Plexiglas with or without needle valve. Flow alarm
Complete range of PVDF , PP , PTFE or Stainless Steel Connectors, fittings and manifolds
The mercury analyzer PA-2 is used for continuous monitoring of mercury concentrations in industrial processes.
The MMS basically comprises a multiplexer-valve unit and a highly accurate and selective mercury detector (VM-3000 Vapor Monitor) for measurements in air and other gases
Fast response time
Wide variety of gases and applications
Compact design
Very low detection limits
ATEX and CSA certified
Short response time
Various gas / liquid filters
filters can be combined as well
NEO Monitors new portable analyser is compact, lightweight, and battery powered for HF measurement on the spot
The well-proven ULTRAMAT 23 gas analyzer extended with an hydrogen sulfide (H2S) sensor
Protea 2000 In-Situ Infra-red gas analyser connected to a Protea Control Unit forms the basis of a Continuous Emission Monitoring System (CEMS)
The Spark is the lowest cost CRDS analyzer on the market, offering powerful performance on a budget, plus the highest range (5 orders of magnitude!) and fastest speed of any Tiger analyzer! Available for detection of H2O and other molecules in a variety of matrices, the Spark is ideal for cylinder analysis in industrial and medical gases, and many other applications.
The CO-rekt allows the use of Tiger's powerful CRDS technology in harsh industrial environments. Outfitted with a purged enclosure, the CO-rekt meets Class I, Div 2 specifications for use as CO, H2O, CH4 and CO2 analyzer in SMR and HyCO processes, among others.
The HALO is our most versatile analyzer, with a perfect blend of high performance, compact footprint, and cost efficiency. The HALO is used to analyze an enormous variety of gases, including hydrides, fluorides, rare gases, and more.
The LaserTrace is our most powerful trace gas analyzer with detection limits as low as 50 ppt, capable of measuring four molecules at a time on up to four separate lines. The system is the semi industry standard to monitor H2O, CH4 and O2 in bulk gases, but is also available for many other molecules and applications.
The Prismatic 2 is a multi-species analyzer capable of monitoring up to four trace molecules in a single gas stream. It is an ideal solution for applications that require the simultaneous analysis of multiple analytes in real-time, for instance, quality control of fuel-cell grade hydrogen or monitoring of unmanned ASUs.
For environmental monitoring and analysis in ambient air, Tiger Optics packages Cavity Ring-Down Spectroscopy in the compact, watchful Tiger-i.
The ALOHA H2O series offers the world's best detection limits for moisture in ammonia (as low as 2 ppb). Ultra-pure ammonia is a critical building block for the manufacture of HB LEDs and for advanced GaN on Si devices.
Response time down to one second
Suitable for high temperatures
Multiple configurations
Fast response time
Automatic health check
Suitable for harsh environment
Fast response time
Stable calibration
Easy to operate
Multi-component analyzer
No interference from background gases
In-situ measurement
Fast response time
Stable calibration
Suitable for very high dust load
Fast response time
Automatic health check
Suitable for harsh environment
Very small, ultra-light, with on-board GPS, data logger, battery pack and color TFT display for very comfortable and easy mercury monitoring in ambient air and other gases
Tiger Optics’ Serani™ Analyzer Interface Software offers users a new way to access their analyzer remotely from any computer or laptop.
We offer a wide range of transmitters suitable for general purpose as well as for hazardous locations.
The Ankersmid APA Series is a precise oxygen gauge for continuous monitoring purposes. The instrument is microprocessor controlled with self-diagnosis capability
atmosFIR is the successor to Protea's previous emissions monitoring FTIR systems,
atmosFIR CEM is a complete emissions monitoring system incorporating the atmosFIR 19” FTIR analyser.
atmosFIRt is the latest generation of FTIR gas analyser technology from Protea in a portable or mobile form.
atmosFIRi is a new concept in FTIR. The unit is designed as a general gas analyser that is simple to use
The atmosFIR system improves upon previous FTIR technology and represents one of the most cost-effective and flexible analytical products on the market today.
atmosFIR EX is an ATEX certified gas analyser system for measurement of industrial gases in a Zone 1 or Zone 2 area
The Solus Multipoint NH3 Ammonia gas analyser is ideal for ambient air and livestock monitoring applications of Ammonia (NH3).
Using the 204M for measurements of waste incineration and combustion plant process is as simple using an FTIR can be.
Protea’s ProMass analyser is a compact, robustly designed semi-portable Quadrupole Mass Spectrometer (QMS) instrument.
It can be used for measurement of the concentration of CO, CO2 and O2 in sample gases simultaneously.
Gasboard 3000 flue gas analyzer can be used for measurement of the concentration of up to 5 gases such as SO2, NO,CO, CO2 and O2 components in sample gases simultaneously
A complete wall-mounted biogas analysis system consists of a rack type biogas analyzer Gasboard-3200, metal case, and gas conditioning system
Gasboard 5020 emission gas analyzer can be used for measurement of the concentration of automobile emission gas CO, CO2, HC, O2 and NO
In industry, active environmental protection means effectively reducing or preventing pollutants and impacts on the environment
This oxygen analyzer is used to continuously measure oxygen concentration in combustion exhaust gas of industrial boilers or furnaces,
Fast response time
Wide variety of gases and applications
Well proven and robust design
Compact design
Low detection limit
Flame proof enclosure
Fast response time
Stable calibration
Suitable for very high dust load
Thermo Scientific™ Orion™ product line is well known around the world for excellence in water and liquid analysis. Our meters, electrodes, buffers,
The Thermo Scientific Orion electrode line offers a wide variety of quality pH electrodes to choose from.
Measurement by ISE can be performed in virtually every laboratory. ISEs measure ion concentrations in samples such as water, food, pharmaceuticals and biological samples.
Electrical conductivity is an inherent property of most materials, and ranges from extremely conductive materials such as metals to non-conductive materials like plastic or glass.
Perform routine water quality parameter measurements in your wastewater and drinking water
Get reliable, high performance conductivity measurements with the durable Thermo Scientific™ Orion™ 2002SS and 2002CC Conductivity Cells.
Continuously monitor oxygen across a wide variety of low and trace level ppb level applications with the Thermo Scientific™ Orion™ 1816DO Low-Level Dissolved Oxygen Analyzer
Get continuous online monitoring and control of steam cycle and boiler chemistry with the Thermo Scientific™ Orion™ 2117LL Low-Level Chloride Analyzer, for use with power generation applications requiring chloride measurement at trace levels.
Maximize up-time and keep your plant in pristine operation with the versatility and performance of the Thermo Scientific™ Orion™ 2109XP Fluoride Analyzer. It offers accuracy, reliability and ease of use to best meet the demands of your fluoride analysis.
Reduce operational costs while producing the highest purity steam with the Thermo Scientific™ Orion™ 2110XP Ammonia Analyzer. This analyzer provides continuous, direct and precise measurements for the control and optimization of boiler ammonia levels.
Concentration, NIR, VIS, UV & color measurement for both liquid and gas.
Process photometer for color and concentration measurements
Process photometer for UV measurement in gases and liquids
Process photometer for NIR measurement for concentration and trace water measurements
industrial Fluorescence and turbidity meter for the measurement of oil in water
Multi-component analyzer
Single-flange solution
No interference from background gases
In-situ measurement
Suitable for hazardous environment
Continuous internal health check
The ESS dew point measurement system has a modular design and can be configured to meet almost any dew point analysis requirement using different dew point meters manufactured by COSA Xentaur.
Xentaur’s Dew Point Meter, Model HDT, is a rugged and unique loop powered dew point meter capable of both gas and liquid hydrocarbon phase measurements.
The Protea 2000 emissions monitoring system is approved for the analysis of exhaust gases from the engines and boilers of ships and offshore rigs. Robust and with proven reliability, up to six gases can be measured including SO2, CO2 and NOx.
A self-sufficient system with almost unlimited possibilities. The Litronic FMS II type moisture measuring installation has been used for decades in a wide range of industries to measure the moisture content of various materials in real time.
Liebherr reliable measurement systems to determine the water content in emulsions and fluids in various production plants such as pipelines and tanks.
The Wobbe Index is actually the correct representation of the heating value of natural gas arriving, from the gas line, at the orifice where a burner is located.
It is not simply the BTU per cubic foot but rather the BTU per cubic foot divided by the square root of the specific gravity.
The COSA 9610™ is one of the latest instruments from COSA Xentaur for measuring Wobbe Index, BTU/Heating Value and CARI (Combustion Air Requirement Index).
The Cosa 9750 is a fast response Zero Emission calorimeter for the on-line monitoring of Wobbe Index (WI), Combustion Air Requirement Index (CARI) and Heating Value (HV). The COSA 9750 is based on the Residual Oxygen Method (ROM), thus avoiding the use of a flame.
COSA Xentaur introduces one of the first commercially available portable Optical Gas Calorimeters. After extensive development work, this instrument proudes the fastest spot check response in the industry; T90=15 seconds for Natural Gas and LPG.